Products

A pickup system when you need it. The C-12 Std installs in about 3 minutes and was designed to allow you to install and remove it quickly and easil...

The CH-1 is designed for use on smaller bodied Celtic harps having 28 strings or less. It provides a very simple solution to the problem of quickly...

First introduced in April 2006 and having undergone a series of continuous improvements over the years, our CH-3 Artist pickup system will work fla...

110 volt ac to 9 volt dc, 500 milliamp, center positive power supply.

110 volt AC to 12 volt DC, 1 amp, center positive power supply

          Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable...

        Model D winding machines are designed to wind with coil wire from 30 gauge to 44 gauge or finer. The Model D was designed and is built as a...

Control Kit-1 for the MicroPre and MicroPre-M contains: 2 500k audio taper pots, 1 .047uf capacitor, 1 1/4" output jack, 1 6" 9volt battery snap, 1...

Control Kit-2 for the MicroPre 2 and MicroPre-2M contains: 3 500k audio taper pots, 1 .047uf capacitor, 1 1/4" output jack, 1 6" 9volt battery snap...

New CV Violin Pickup - Simply Slides Into Place On A Violin Bridge ....when you need a pickup some of the time or all of the time..... The new CV p...

The D-4 Std dulcimer pickup is an outstanding pickup that combines great sound with simple and quick installation......and best of all, for most in...

The Dualie is small, surface mounted pickup designed for use on medium sized soundboards. The Dualie Insider comes complete and ready to install an...

The Dualie is a small, surface mounted pickup designed for use on medium sized soundboards. The Dualie Outsider comes complete and ready to use wit...

  We've put a kit together for converting the electronics and motor from what  was used for the older model ECW winders to our current Model B.    ...

Take apart endpin jack, stereo configuration: 3 contacts  plus chassis ground. As used with many of our passive pickups and all of our endpin jack ...

The EP-01 is a small, light weight piezo sensor that is usually installed internally on an instrument's soundboard. The pickup comes with 18" of sh...

The new HD-4 features twin sensors and a neat little jack assembly. New smaller and thinner sensors fit easily under the strings of most hammered d...

     The HFN is designed to give you a full, rich sound and will reproduce exactly what your guitar sounds like.  Along with being simple to instal...

   Please Note; This is for the HFN element ONLY, this does not come with the pickup base or preamp/endpin jack.  The HFN is designed to give you a...